HP ProLiant DL320e User Manual page 43

Hp proliant dl320e gen8 server user guide
Hide thumbs Also See for ProLiant DL320e:
Table of Contents

Advertisement

Four-bay LFF drive model
o
Eight-bay SFF drive model
o
If you are installing the optical drive in an SFF drive model, connect the optical drive cable to the optical
8.
drive.
Connect the optical drive cable:
9.
Route the optical drive cable through the cable clip on the front chassis.
a.
Route the optical drive cable along the side of the system board, and then connect the cable to the
b.
system board.
Connect the four-pin (1x4) power supply cable to the power connector of the optical drive cable.
c.
Hardware options installation 43

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proliant dl320e gen8

Table of Contents