HP ProLiant DL320e User Manual page 36

Extend the server from the rack (on page 17).
o
Remove the server from the rack (on page 18).
o
Remove the access panel (on page 19).
4.
Remove the PCI riser cage (on page 21).
5.
Connect the Mini-SAS cable to the storage controller.
6.
Install the storage controller
7.
Route the Mini-SAS cable along the side of the system board towards the front chassis, and then connect
8.
the cable to the drive backplane:
Full-height controller connection
o
("Installing a storage controller" on page 38).
Hardware options installation 36