Esata Device - Toshiba PPA60U-00L019 User Manual

Problem
The "USB Wakeup
function" does not work.

eSATA device

In addition to the information in this section, please also refer to the
documentation supplied with your eSATA device.
Problem
eSATA device does not
work
User's Manual
Procedure
When USB Sleep and Charge function is
enabled, the "USB Wakeup function" does not
work for ports that support the USB Sleep and
Charge function.
In that case, use a USB port, if there is one, that
does not have the USB Sleep and Charge
function-compatible icon (
disable USB Sleep and Charge function.
Procedure
Remove the eSATA device from the computer
and then reconnect it to a free port it in order to
ensure it is firmly attached.
A connected eSATA device may not be
recognized if it is connected to the computer's
eSATA/USB combo port while the computer is in
Sleep Mode or Hibernation Mode. If this occurs,
disconnect the eSATA device and then reconnect
the device while the computer is turned on.
Ensure that any required eSATA device drivers
are properly installed - to achieve this you should
refer to both the device documentation and the
operating system documentation.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Troubleshooting
) or change to
8-16