Installing The Battery Pack - Toshiba PPA60U-00L019 User Manual

3. Remove all cables and peripherals that are connected to the computer.
4. Close the display panel and turn the computer upside down.
5. Slide the battery lock (1) into its (
6. Slide and hold the battery release latch (2) to disengage the battery
pack and then remove it from the computer (3).
Battery lock

Installing the battery pack

To install a battery pack, follow the steps as detailed below:
Do not touch the battery release latch while holding the computer or the
battery pack might fall out due to the unintentional release of the battery
release latch and cause injuries.
1. Insert the battery pack as far as it will go into the computer (1).
2. Ensure that the battery pack is securely in place and the battery lock (2)
is in its (
Battery lock
3. Turn your computer over.
User's Manual
Battery pack
Releasing the battery pack (PORTÉGÉ R600)
) position.
Battery pack
Securing the battery pack (PORTÉGÉ R600)
Power and Power-Up Modes
) position.
Battery
release latch
6-9