Initiating Sleep (Fn+F3) - Compaq nc2400 - Notebook PC User Manual

Initiating Sleep (fn+f3)

Press fn+f3
When Sleep is initiated, your information is stored in random access memory (RAM), the screen is
cleared, and power is conserved. While the computer is in the Sleep state, the power light blinks.
CAUTION
The computer must be on before you initiate Sleep.
NOTE
initiates Hibernation and the information stored in RAM is saved to the hard drive. The factory
setting for critical battery action is Hibernate, but this setting can be changed in advanced power
settings.
To exit Sleep, briefly press the power button.
The function of the
Hibernation instead of Sleep.
NOTE
fn+f3
ENWW
to initiate Sleep.
To reduce the risk of information loss, save your work before initiating Sleep.
If a critical battery level occurs while the computer is in the Sleep state, the computer
fn+f3 hotkey can be changed. For example, you can set the
In all Windows operating system windows, references to the sleep button apply to the
hotkey.
fn+f3 hotkey to initiate
Hotkeys 5