Removing A Q Menu Item; Adding A Listed Item To The Q Menu; Adding A User-Defined Item To The Q Menu; Changing A User-Defined Item - Compaq nc2400 - Notebook PC User Manual

Removing a Q Menu item

To remove an item from the Q Menu:
1. In the HP Quick Launch Buttons control panel, click the Q Menu tab.
2. On the Items to display on Q Menu list, clear the check box for each item you want to remove.
3. To save your preferences and close the control panel, click Apply, and then click OK.

Adding a listed item to the Q Menu

To add an item from the Items to display on Q Menu list to the Q Menu:
1. In the HP Quick Launch Buttons control panel, click the Q Menu tab.
2. Select the check box for the item you want to add.
3. To save your preferences and close the control panel, click Apply, and then click OK.

Adding a user-defined item to the Q Menu

To add an item to both the Items to display on Q Menu list and to the Q Menu when it is not on the
Items to display on Q Menu—for example, an item on a drive, network, or the Internet:
1. In the HP Quick Launch Buttons control panel, click the Q Menu tab.
2. Click Add.
3. In the Add New Menu Entry dialog box, you can add the item by typing or by browsing:
●
To add the item using the keyboard, type a name for the item in the Display Name box and
type the path to the item in the File Name box. If you prefer to type the Display Name, but
browse for the File Name, leave the File Name box blank.
● To add an item by browsing, click the Browse button.
In the window, select the item. (The full name of the item is displayed in the File Name box
and, if you did not type a name earlier in the Display Name box, a Display Name is generated
from the item name and displayed in the Display Name box.)
4. To save your preferences and close the control panel, click Apply, and then click OK.

Changing a user-defined item

User-defined items can be changed, but system-defined items cannot be changed. If you select a
system-defined item on the Items to display on Q Menu list, the Modify button is unavailable.
To change the display name and/or file name of a user-defined item:
1. In the HP Quick Launch Buttons control panel, click the Q Menu tab.
2. Click the item on the Items to display on Q Menu list.
12 Chapter 2 Keyboard ENWW