Sony Cyber-shot DSC-RX100 User Manual page 209

Cyber-shot User Guide
Before Use
Shooting
Viewing
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions/About this camera
Contents list
Top page > Precautions/About this camera > Precautions > Charging the battery pack
Charging the battery pack
The supplied AC Adaptor is dedicated to this camera. Do not connect with other electronic devices.
Doing so may cause a malfunction. Also, make sure to use a genuine Sony AC Adaptor.
If the Power/Charge lamp of the camera flashes during charging, remove the battery pack being
charged, and then insert the same battery pack into the camera securely again. If the Power/Charge
lamp flashes again, this may indicate a battery error or that a battery pack other than the specified
type has been inserted. Check that the battery pack is the specified type. If the battery pack is the
specified type, remove the battery pack, replace it with a new or different one and check that the
battery is charged correctly. If the battery is charged correctly, a battery error may have occurred.
If the Power/Charge lamp flashes even if the AC Adaptor is connected to the camera and the wall
outlet (wall socket), this indicates that charging has stopped temporarily and is on standby. Charging
stops and enters standby status automatically when the temperature is outside of the recommended
operating temperature. When the temperature returns to the appropriate range, charging resumes
and the Power/Charge lamp lights up again. We recommend charging the battery pack in an ambient
temperature of between 10°C to 30°C (50°F to 86°F).
GB 209
Back to top