Playing A Usb Device - Sony STR-DH740 Operating Instructions Manual

To operate the iPod/iPhone
using the remote control
iPhone
CTRL
N
X
Press USB before you use the following
buttons.
Press Operation
N
Starts play.
X, x Pauses play.
m/M
Fast reverses or forwards.
./> Goes to the previous/next
track.
iPhone CTRL Selects the iPod/iPhone
control mode.
Notes on iPod/iPhone
• The iPod/iPhone is charged when
connected to the receiver while the
receiver is turned on.
• You cannot transfer songs onto the iPod/
iPhone from this receiver.
38
GB
• Do not remove the iPod/iPhone during
operation. To avoid data corruption or
damage to the iPod/iPhone, turn the
receiver off when connecting or
removing the iPod/iPhone.
iPod/iPhone message list
Message and explanation
USB
Reading
The receiver is recognizing and reading
information of the iPod or iPhone.
Loading
The receiver is loading information of the
iPod or iPhone.
Not supported
An unsupported iPod or iPhone is connected.
No device is connected
No iPod or iPhone is connected.
No music
HOME
No music is found.
m/M
Headphones not supported
./>
No sound is output from the headphones when
x
iPod or iPhone is connected.

Playing a USB device

You can enjoy music from the USB device
by connecting it to the
receiver.
For details on connecting a USB device,
see "Connecting an iPod, iPhone, USB
device" (page 28).
The music file formats that can be played
back by this receiver are as follows:
File format
MP3 (MPEG-1 Audio
Layer III)
AAC*
WMA9 Standard*
WAV
(USB) port on the
Extensions
".mp3"
".m4a", ".3gp",
".mp4"
".wma"
".wav"