Asus Z8PE-D12X - Motherboard - SSI EEB 3.61 User Manual page 115

8. When creating a RAID 1 or a RAID 10 set, select DWC from the Virtual
Drive menu, and then press <Enter>.
When creating a RAID 0 set, proceed to step 10.
9. Select On to enable the Disk Write Cache setting, and then press <Enter>.
LSI Software RAID Configuration Utility Ver A.60 Jul 30, 2008
LD
0
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Cursor Keys, SPACE-(De)Select F2-ChIdInfo F3-SlotInfo F10-Configure Esc-Quit
Enabling DWC can improve the performance, but with the risk of data loss.
10. When finished setting the selected virtual drive configuration, select Accept
from the menu, and then press <Enter>.
LSI Software RAID Configuration Utility Ver A.60 Jul 30, 2008
LD
0
Management Menu
Configure
Initialize
Objects
Rebuild
Check Consistency
Cursor Keys, SPACE-(De)Select F2-ChIdInfo F3-SlotInfo F10-Configure Esc-Quit
ASUS Z8PE-D12 Series
BIOS Version
Virtual Drive(s) Configured
RAID Size #Stripes
Easy Configuration - ARRAY SELECTION MENU
1 77247MB
PORT #
0
DNLIN A00-00
1
DNLIN A00-01
Virtual Drive 0
RAID = 1
Size = 77247MB
DWC = Off
RA = On
Accept
SPAN = NO
Disk Write Cache Setting Of VD
BIOS Version
Virtual Drive(s) Configured
RAID Size #Stripes
Easy Configuration - ARRAY SELECTION MENU
1 77247MB
PORT #
0
DNLIN A00-00
1
DNLIN A00-01
Virtual Drive 0
RAID = 1
Size = 77247MB
DWC = Off
RA = On
Accept
SPAN = NO
Accept This VD Configuration And Go To Next VD
A.08.09161344R
StripSz Status
2 64 KB ONLINE
Change DWC
Off
On
A.08.09161344R
StripSz Status
2 64 KB ONLINE
5-9