Table of Contents
Advertisement
5.3.4
Resetting disks to Non-RAID
Take caution before you reset a RAID volume hard disk drive to non-RAID.
Resetting a RAID volume hard disk drive deletes all internal RAID structure on
the drive.
To reset a RAID set hard disk drive
1.
From the utility main menu, select 3. Reset Disks to Non-RAID and press
<Enter>. The following screen appears.
WARNING: Resetting a disk causes all data on the disk to be lost.
(This does not apply to Recovery volumes)
Port Drive Model
0
ST3160812AS
1
ST3160812AS
[ ↑↓ ]-Previous/Next
2.
Use the up/down arrow key to select the RAID set drive(s) you want to reset,
and then press <Space> to select.
3.
Press <Enter> to reset the RAID set drive(s). A confirmation message
appears.
4.
Press <Y> to reset the drive(s) or press <N> to return to the utility main
menu.
5-30
[
RESET RAID DATA
Resetting RAID disk will remove its RAID structures
and revert it to a non-RAID disk.
Serial #
9LS0HJA4
9LS0F4HL
Select the disks that should be reset.
[SPACE]-Selects [ENTER]-Selection Complete
]
Size
Status
149.0GB
Member Disk
149.0GB
Member Disk
Chapter 5: RAID configuration
Hide quick links:
Advertisement
Table of Contents
