Removable Drives; Boot Settings Configuration - Asus Z8PE-D12X - Motherboard - SSI EEB 3.61 User Manual

4.6.2

Removable Drives

Removable Drives
1st Device
1st Device [1st FLOPPY DRIVE]
Allows you to specifies the boot sequence from the available devices.
Configuration options: [1st FLOPPY DRIVE] [Disabled]
4.6.3

Boot Settings Configuration

Boot Settings Configuration
Quick Boot
Full Screen Logo
AddOn ROM Display Mode
Bootup Num-Lock
Wait For 'F1' If Error
Hit 'DEL' Message Display
Interrupt 19 Capture
Quick Boot [Enabled]
Enabling this item allows the BIOS to skip some power on self tests (POST) while
booting to decrease the time needed to boot the system. When set to [Disabled],
BIOS performs all the POST items. Configuration options: [Disabled] [Enabled]
Full Screen Logo [Disabled]
Allows you to enable or disable the full screen logo display feature.
Configuration options: [Disabled] [Enabled]
Set this item to [Enabled] to use the ASUS MyLogo2™ feature.
4-36
[1st FLOPPY DRIVE]
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
[Enabled]
[Disabled]
[Force BIOS]
[On]
[Enabled]
[Enabled]
[Enabled]
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
BIOS SETUP UTILITY
Boot
BIOS SETUP UTILITY
Boot
Specifies the boot
sequence from the
available devices.
Select Screen
←→
Select Item
↑↓
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Allows BIOS to skip
certain tests while
booting. This will
decrease the time
needed to boot the
system.
Select Screen
←→
Select Item
↑↓
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Chapter 4: BIOS setup