Peripheral Configuration Submenu - Intel D865PCD Product Manual

Peripheral Configuration Submenu

Main Advanced
Peripheral Configuration
Serial Port A
Parallel Port
Mode
Audio
Onboard LAN
ASF Support
This submenu shown in Table 16 is used for configuring computer peripherals.
Table 16.

Peripheral Configuration Submenu

Feature
Serial Port A
Base I/O Address
(This feature is present
only when Serial Port A
is set to Enabled)
Interrupt
(This feature is present
only when Serial Port A
is set to Enabled)
Parallel Port
Security Power Boot
[Auto]
[Auto]
[Bi-directional]
[Enabled]
[Enabled]
[Enabled]
Options Description
• Disabled
Configures serial port A.
• Enabled
Auto assigns the first free COM port, normally COM1,
• Auto (default)
the address 3F8h, and the interrupt IRQ4.
An * (asterisk) displayed next to an address indicates
a conflict with another device.
• 3F8 (default)
Specifies the base I/O address for serial port A, if
• 2F8
serial port A is Enabled.
• 3E8
• 2E8
• IRQ 3
Specifies the interrupt for serial port A, if serial port A
• IRQ 4 (default)
is Enabled.
• Disabled
Configures the parallel port.
• Enabled
Auto assigns LPT1 the address 378h and the
• Auto (default)
interrupt IRQ7.
An * (asterisk) displayed next to an address indicates
a conflict with another device.
Using the BIOS Setup Program
Exit
m o
Select Screen
n p
Select Item
Select ` Sub-Menu
Enter
F1 General Help
P9 Setup Defaults
F10 Save and Exit
ESC Exit
continued
57