Operating An Ipod Directly - Passenger Control - Sony WX-GT90BT Operating Instructions Manual

Caution for iPhone
When you connect iPhone via USB, phone call
volume is controlled by iPhone, not the unit. Do
not inadvertently increase the volume on the unit
during a call, as sudden loud sound may result
when the call ends.
Tip
The iPod is recharged while the unit is turned on.
Resuming mode
When the iPod is connected to the unit,
playback starts in the mode set by the iPod.
In this mode, the following buttons do not
function.
–  (
)
–  (
)
Changing display items
Press .
Note
Some letters stored in iPod may not be displayed
correctly.
Skipping albums, podcasts,
genres, playlists and artists
To Do this
Press / (ALBUM /
Skip
) [press once for each
skip]
Press and hold /
Skip
(ALBUM /)
continuously
[hold to desired point]
Operating an iPod directly
— Passenger control
You can operate an iPod directly even when
it is connected to the unit.
1
During playback, press and hold
.
"MODE IPOD" appears and you will be
able to operate the iPod directly.
To exit the passenger control, press and
hold .
"MODE AUDIO" will appear and direct
operation of the iPod will not be possible.
Note
The volume can be adjusted only by the unit.
15