Canon PowerShot A40 Software Starter Manual page 29

26
Windows 98
1.
Attach the supplied USB cable to the computer's USB port and the
camera's Digital Terminal. Prepare the camera for communication with the
computer.
For USB interface connection instructions, see "Connecting to a USB Port"
(p. 16).
2.
After a moment, the following dialog will display.
3.
Click the [Browse] button.
The Open dialog will display.
4.
Click the [Browse] button and select the appropriate folder for your camera
model listed below, on the drive where the software has been installed.
PowerShot S110/S300
DIGITAL ELPH or
DIGITAL IXUS 300/
DIGITAL IXUS v
PowerShot A20/A10
PowerShot G2
PowerShot S40/S30
PowerShot A30
PowerShot A40
[ProgramFiles\Canon\DC USB TWAIN\CAMERA2]
[ProgramFiles\Canon\DC USB TWAIN\CAMERA3]
[ProgramFiles\Canon\PowerShot A30 TWAIN]
[ProgramFiles\Canon\PowerShot A40 TWAIN]