Canon PowerShot A40 Software Starter Manual page 103

100
Display Mode List Box
Click here to select between the
Thumbnail and Preview display modes.
Click here to insert a check mark and then select a white portion
of the image to automatically adjust the white balance.
Sets the parameters for converting RAW images (may not appear with some camera models).
How to Convert RAW Images with the Plug-in Module
1. Select a RAW image in the Plug-In Module and click the [Transfer Image] button.
• You can change the RAW image conversion settings and image transmission
• Please note that image attribute settings revert back to the default settings
Using the False Color Filter
Click the Plug-in Module's [Preferences] button to open the Preferences dialog. In the
[Conversion Settings] section, you can select whether or not the False Color Filter is used.
Remove the check mark from this option if you do not need to reduce the false
colors in the image.
Display Size List Box
Click here to select an
image display size.
Click here to adjust
the white balance.
The RAW image will automatically be converted and sent to Adobe Photoshop
LE as 8-bits-per-channel data.
format in the Plug-in Module's main window (p. 99).
when you close the Plug-In Module.
Image Transmission Mode List Box
Click here to select to transmit the selected
images as single images or as an index sheet.
Image Format List Box
Click here to select the format of
the images you wish to display.
Click here to adjust Click here to adjust
the contrast. the color saturation.