HP D7171A - NetServer - LPr Manual page 6

HP
Server
FC Hub/Switch
HOST FC
(
Redundancy Group1 owner
Primary path for RG 1*
Secondary path for RG 2
*Preferred path mode only.
Performance note:
For best performance, If Server 1 and Server 2 are configured in an active/active cluster
configuration, where each is running a critical application software, each application should
use LUNs owned by a different VA controller, and the primary path of the server running the
application should be to the VA controller owning that application' s LUNs.
VA 7400 Dual HBA Cluster
Public Network
Private
Server
Network
1
FC Hub/Switch
HOST FC
) (
Redundancy Group 2 owner
Primary path for RG 2*
Secondary path for RG 1
3/8/02
2
)
lp2000r2k71/74
6