HP D7171A - NetServer - LPr Configuration Manual page 3

Shared
HP Rack
Storage/12FC
Host Bus Adapter
Model
No. of controllers
Driver
RAID level
Cabinet
RAID arrays
Number of cabinets
FC Array Cards
No. of cards per cabinet
Firmware
Status SCSI ID
Disk SCSI IDs
Disk drives:
Fibre Channel Cables
Hub
Model
Quantity
Required
HP Fibre Channel Host Bus Adapter - HP D8602A
1
Hhba5100.sys 2.06
0, 1, 3, 5, 10
For SPOFless configurations a fault tolerant RAID type, e.g. RAID 5, is
recommended for all shared storage.
HP NetServer Rack Storage/12FC- D5991A
Not more than eight physical drives per logical array and not more than
eight LUNs are permitted per cluster.
1
HP Fibre Channel Array Controller - D5990A
2 (Requires second card be installed in the Rack Storage/12FC)
4.64-00 or later.
For SPOFless, use 5.46-04 (Navigator L.18.04.5 or later)
5 (fixed)
0 – 3, 8 – 15 (fixed)
Any HP drive supported by storage enclosure including:
HP 9.1 GB (7200 rpm) Low Profile Ultra2 SCSI Disk Module D6106A
HP 9.1 GB (7200 rpm) Low Profile Ultra3 SCSI Disk Module P1217A
HP 9.1 GB (10k rpm) Low Profile Ultra2 SCSI Disk Module D6107A
HP 9.1 GB (10k rpm) Low Profile Ultra3 SCSI Disk Module P1168A
HP 18.2 GB (7200 rpm) Half Height Ultra2 SCSI Disk Module D6108A
HP 18.2 GB (7200 rpm) Low Profile Ultra3 SCSI Disk Module P1216A
HP 18.2 GB (10k rpm) Half height Ultra2 SCSI Disk Module D7031A
HP 18.2 GB (10k rpm) Low Profile Ultra3 SCSI Disk Module P1166A
HP 18.2 GB (7200 rpm) Low Profile Ultra2 SCSI Disk Module D7174A
HP 18.2 GB (10k rpm) Low Profile Ultra2 SCSI Disk Module D7175A
HP 36.4 GB (10k rpm) Half Height Ultra2 SCSI Disk Module D8210A
HP 36.4 GB (10k rpm) Low Profile Ultra3 SCSI Disk Module D9419A
Optical – Server to Hub Only: 50 meter D6980A
Copper – Server to Hub and/or Shared Storage to Hub:
HP D6976A 6-port fibre channel hub
1
2 for SPOFless with hubs
3
100 meter D6981A
3 meter D6978A
5 meter D6979A
10 meter D7080A