Setting Up Aol2 At The Management Console; Using Aol2; Using Aol2 From Windows - HP D7171A - NetServer - LPr User Manual

Chapter 2

Setting Up AOL2 at the Management Console

1. At your management console, run the AOL2 client software installation
program. The setup program is located on the HP NetServer Navigator
CD-ROM under
Manage\Console\Aol_util\setup.exe
2. After the installation, look under Programs | Hewlett-Packard for the
Alert-On-LAN2 icon.
NOTE The only way to ensure that the AOL2 power functions aren't
used by unauthorized personnel is to install the client software
only on a designated, secure, password-protected management
console.
For the most protection, you should only connect the LAN A
port of your HP NetServers to an isolated LAN dedicated to
management tasks and only available to authorized
administrators.

Using AOL2

Once AOL2 is setup at both the server and the management console, do the
following to access NetServer power functions over the network.

Using AOL2 from Windows

From your management console running Windows, click on the Alert-On-LAN2
icon found under Programs | Hewlett-Packard. The following interface will
appear:
6
Installing and Using AOL2