Appendix A: Connecting the Receiver
Antennas
Extend the FM antenna to its full length and adjust it for the
best reception.
After you adjust the AM antenna, place it on a
level surface or attach it to a wall using the holes in the
antenna's base.
This connection provides
• stereo sound from FM stations
• mono sound from AM stations
To use this connection, you
must have
• (1) FM wire antenna (included)
• (1) AM loop antenna (included)
To Connect
1. Connect the cables as shown in the
diagram below.
Using This Connection
To listen to the radio
1. Turn on the receiver.
2. Select a band (AM/FM).
3. Turn to the desired frequency.
4. Adjust the position of the antenna as needed.
FM Wire Antenna
FM ANT
300
BAL
AM ANT
AM Loop Antenna
45