Keurig Platinum B70 Owner's Manual page 7

Controls & Indicators (LCD Control Center)
SECTION 2
simply press the Power Button and you can
15
fig.
brew as soon as the water is heated and the
"READY TO BREW" indicator is displayed on
the LCD Control Center. NOTE : The On time and
Off time functions operate independently from
H M
one another. To cancel either function, follow the
SET C LOCK
steps above and use the "H" and "M" Buttons to
AUTO OFF
ONOFF TIME
advance to 12:00 AM. When you reach 12:00 AM,
BREW TEMP
BREW SIZE
the Control Center will indicate "OFF" and the
MENU
function will be disabled (fig. 15).
NOTE: The Auto Off timer and the On/Off Time
MENU
programming options operate independently,
but can also be programmed to work together.
Set Set
BREW
Hours Minutes
For example, you can set the On Time function to
turn on at 7:00 AM and then set the Auto Off timer
function to turn off the Brewer two hours after
the last brew.
Programming Brew Temperature (187° – 192º F)
The Brewer brews at a preset temperature of 192°. You can adjust this
temperature down by 5 degrees if you prefer a cooler cup of coffee, tea
or hot cocoa. Simply follow the instructions below.
1. Press the MENU Button on the LCD Control
16
fig.
Center five times to program the Brew
Temperature feature.
The LCD Control Center will now display the
2.
-
programming options with a small arrow next
to "SET BREW TEMP" (fig. 16). Also, the
C LOCK
AUTO OFF SET
temperature 192° (initial setting) will be
ONOFF TIME SET
SET BREW TEMP
BREW SIZE displayed at the top of the LCD Control Center
to indicate the current temperature setting.
MENU
3 . A minus sign will appear over the Left Button
MENU
and/or a plus sign over the Right Button. Use
these Buttons to raise or lower the temperature
- +
BREW
one degree at a time.
4. Once you have reached your desired brew
temperature, press the MENU Button twice to
exit the programming mode. "BREW TEMP SET"
will be indicated in the LCD Control Center if you
have changed it from 192°.
12
5. To change the brew temperature again, repeat steps 1 through 3 to
change the temperature up or down, remembering that the temperature
can only be between 187° and 192° .
NOTE: At high altitudes (over 5,000
feet), if boiling occurs, use the temperature adjustment (+0 and -5 degrees)
to lower the temperature.
Programming Your Brew Size
The Brewer is preset with the Small Mug
17
fig.
(7.25 oz.) as the default brew size. The default
brew size allows the user to avoid scrolling
through brew sizes if a particular size is
chosen most often.
To change the default brew size to your
C LOCK
AUTO OFF SET
ONOFF TIME SET
desired brew size:
BREW TEMP
SET BREW SIZE
1. Press the MENU Button six times.
2. Using Left and Right Buttons, select your
desired default brew size (fig. 17).
Once the desired default brew size is selected,
3.
press the MENU Button once to exit. The LCD
Control Center will indicate the brew size set.
SECTION 3
Cleaning & Maintenance
Cleaning External Parts
Regular cleaning of the Brewer's external components is recommended.
Never immerse the Brewer in water or other liquids. The Housing
1.
and other external components may be cleaned with a soapy, damp,
non-abrasive cloth.
2. The Drip Tray can accumulate up to 12 oz. of overflow. The Drip Tray
and Drip Tray Plate should be periodically inspected and rinsed clean.
To remove the Drip Tray Assembly, simply slide it toward you, keeping it
level at all times to avoid spilling. The Drip Tray and Drip Tray Plate
should not be placed in the dishwasher. They should be cleaned with a
damp, soapy, non-abrasive cloth and rinsed thoroughly.
Cleaning the K-Cup Pack Holder assembly
®
The K-Cup Pack Holder
1. Cleaning the Parts — ®
18
fig.
Assembly can be placed onto the top shelf of a
dishwasher. NOTE: Use low temperature cycles in
To remove from the Brewer,
the dishwasher.
open the cover by lifting the Handle. Grasp the
top of the K-Cup ® Pack Holder with one hand
while pushing up on the bottom of the K-Cup
Pack Holder from underneath with the other
until it releases (fig. 18). After cleaning, align the
K-Cup ® Pack Holder with the opening using the
two front ribs as a guide, and snap into place
from the top.
13
®