Set Up Instructions - Sony NEX-5N User Manual

4. Set up Instructions

Special Note on Responsibility for Watertight Integrity
Each housing is individually inspected and hydrostatically tested in the factory. However, the responsibility
for ensuring the integrity of the watertight seal lies entirely with the user. 10Bar accepts no liability for
damage to, or loss of any equipment used with, or placed inside the housing. It is highly recommended that
an in-water test of the housing without the camera be carried out before the first dive, after changing ports or
alteration of housing configuration. This simple test can be done by lowering the housing with ballast to the
expected diving depth and then retrieved to check for leaks.
Key-hole Lock
The clear acrylic lid is secured to the housing by two key-hole locks.
•
• Key-hole locks are simple, yet extremely secure mechanisms for locking down the housing lid.
Opening the Lid
Turn the levers of the locks perpendicular to the wall
of the housing until the lock is released on both sides.
If the lid cannot be pulled off by hand, then use the universal housing opening key to insert in between the
lid and body near the key-hole lock and turn to push off the lid.
Pull out the lid by holding on the grip near the lock
5