Sony NEX-5N User Manual page 7

NEX-5N Housing + Extension Ring M77 x 30 + PORT M 77 x 17
Replacing the Lid
• Replace the lid and make sure the lever is perpendicular to the side wall of the housing.
• Lock the lid by pressing down the lever and turn until the lever is parallel to the side wall of the housing.
• After replacing and locking the lid, make a final visual inspection of the main O-ring for contamination.
Note: If the O-ring has formed a good seal, a continuous thin black line, about 0.5 to 1mm in
width should be visible where the O-ring is in contact with the lid. Follow this line all the way
round the lid as a final check that the seal is good.
7