Operation Of Remote Control - Sanyo XF42 - PLC XGA LCD Projector Owner's Manual

OPERATION OF REMOTE CONTROL

LIGHT BUTTON
Lights the buttons on the remote
control for about 10 seconds.
MENU BUTTON
Used to select MENU
operation. (P21, 22)
POINT (UP / DOWN / LEFT / RIGHT)
BUTTONS
Used to select an item or adjust
value in ON-SCREEN MENU.
They are also used to pan image
in DIGITAL ZOOM +/– mode.
(P33)
LENS SHIFT BUTTON
Used to select LENS
SHIFT function. (P24)
ZOOM BUTTONS
Used to adjust zoom.
(P24)
FREEZE BUTTON
Used to freeze picture.
(P25)
P-TIMER BUTTON
Used to operate P-TIMER
function. (P25)
WIRED REMOTE JACK
When using as Wired Remote
Control, connect Remote Control
Cable (not supplied) to this jack.
Battery installation is required
when using as Wired Remote
Control.
AUTO PC ADJ. BUTTON
Used to operate AUTO PC
Adjustment function. (P28)
BEFORE OPERATION
POWER ON-OFF BUTTON
Used to turn projector on or
off. (P23)
NO SHOW BUTTON
Used to turn picture into
black image. (P25)
SELECT BUTTON
Used to execute item
selected. It is also used to
expand / compress image
in DIGITAL ZOOM mode.
(P33)
IMAGE ADJ. BUTTON
Used to adjust image
level. (P37-38)
FOCUS BUTTON
Used to adjust focus.
(P24)
INPUT 1, 2, 3, 4 BUTTONS
Used to select input
source. (P26, 34)
D.ZOOM BUTTON
Used to select DIGITAL
ZOOM +/– mode and
resize image. (P33)
KEYSTONE BUTTON
Used to correct
keystone distortion.
(P24, 39)
IMAGE SEL. BUTTON
Used to select image level.
(P31, 36)
19