Lamp Replace Counter - Sanyo XF42 - PLC XGA LCD Projector Owner's Manual

ORDER REPLACEMENT LAMP
Replacement Lamp can be ordered through your dealer. When ordering a Projection Lamp, give the
following information to the dealer.
●
Model No. of your projector
●
Replacement Lamp Type No.
Be sure to reset Lamp Counter when Lamp Assembly is replaced. When Lamp Replace Counter is reset, LAMP
REPLACE indicator stops lighting.
1 Turn projector on, press MENU button and ON-SCREEN
MENU will appear. Press POINT LEFT/RIGHT button(s) to
move a red frame pointer to SETTING Menu icon.
2 Press POINT DOWN button to move a red frame pointer to
"Lamp counter reset" and then press SELECT button.
3 Move arrow to replaced lamp number (Lamp 1, Lamp 2, Lamp 3
or Lamp 4) and then press SELECT button. Message "Lamp
replace counter Reset?" is displayed. Move pointer to [Yes] and
then press SELECT button.
NOTE: Be sure to reset correct lamp number otherwise LAMP
REPLACE indicator continues lighting.
4 Another confirmation dialog box appears and select [Yes] to
reset Lamp Replace Counter.
Do not reset Lamp Replace Counter except after Projection lamp is
replaced.
: PLC-XF42
: POA-LMP49

LAMP REPLACE COUNTER

(Service Parts No. 610 300 0862)
Move pointer to Lamp counter reset and then
press SELECT button.
1 3
replaced lamp number (Lamp 1, Lamp
2 4
2, Lamp 3 or Lamp 4) and then press
SELECT button.
Message "Lamp replace counter Reset?" is
displayed. Move pointer to [Yes] and then
press SELECT button.
Select [Yes] to activate it.
APPENDIX
Move arrow to
45