HP StorageWorks 2/140 - Director Switch Release Note page 11

To execute a CTP switchover, perform the following steps:
1. From Product Manager Hardware view, verify that an amber LED indicator
2. Right-click on a CTP card and choose Switchover from the menu.
3. Upgrade firmware to version 05.01.00-24.
All products must be running firmware version 04.00.00 or higher before
upgrading to version 05.01.00-24. If a switch or director is operating with a
firmware level below 04.00.00, you must upgrade to version 04.00.00 or higher
before installing version 05.01.00-24.
All products must be running version 02.00.00 or higher before upgrading to
version 04.01.02-04. Upgrading to version 04.01.02-04 from version 02.00.00 or
higher is nondisruptive to attached devices.
Firmware that predates the 01.03.00 or 01.04.00 firmware release must first be
upgraded to a 01.03.xx or 01.04.xx firmware version, and then upgraded to
version 02.00.00 or higher, before the upgrade to version 04.01.02-04 can be
completed.
Considerations for Downgrading the Version of Firmware
Directors and edge switches are not required to be offline before performing a
firmware downgrade operation. Limitations to downgrades are clearly identified if
there are any limitations to performing the operation.
Before downgrading firmware, it is highly recommended that you back up the
edge switch or director configuration in the event that a failure should occur. Refer
to the switch or director Product Manager user guide for more information.
Embedded Web Server (EWS) also provides an option to print or save product
configuration to a file. Refer to the HP StorageWorks Embedded Web Server User
Guide for more information.
Downgrading directly to a version prior to 04.00.00 from version 05.01.00-24 is
not allowed. To downgrade to a version prior to 04.00.00, you must first
downgrade to version 04.YY.ZZ.
Director Release Notes
does not display for either CTP card.
Note: The switch or director will lose its Ethernet connection for a short period
during the switchover process.
Important Information
11