Incorrect; Reset - HP StorageWorks 2/140 - Director Switch Release Note

Known Issues
Director Properties Description May Be Incorrect
The text shown in the Description field of the Director Properties panel for the
Director 2/140 may be incorrect. It may show SAN Director 64. This has no
effect on the operation of the Director 2/140. This is a user-configurable
description for the director, and may be changed to whatever you want by
choosing Configure > Identification using HAFM, or by choosing Configure >
Director > Identification using the Embedded Web Server interface.
IML is Required After Performing a Configuration Reset
If a Reset Configuration is performed on a Director 2/140 to reset the director to
factory configuration, an initial machine load (IML) is required to be performed to
complete the process. This is done by pressing the white button on the front of
either CTP card for more than three seconds. This can also be accomplished by
turning the power to the Director 2/140 off and then back on.
20 Director Release Notes