HP StorageWorks 2/140 - Director Switch Release Note page 14

Important Information
Note:
switchover process.
5. Upgrade the Firmware to Version 05.02.00-13 on each director using the Send
HAFM Upgrade Required for Firmware Version 05.02.00-13
If you are using HAFM to manage the Director 2/140, Director 2/64, Edge Switch
2/32, Edge Switch 2/24, and/or Edge Switch 2/16, and they are running firmware
Version 05.02.00-13, you need to upgrade HAFM to Version 07.01.00-09
(minimum). For more information on upgrading software versions, refer to the HP
StorageWorks HA-Fabric Manager User Guide. The features of this software
version are detailed in the accompanying manuals listed in section
Director
Open Trunking Feature is Not Available in Current Release
The Open Trunking feature is not available in Firmware Version 05.02.00-13.
Open Trunking feature will be available in a future release.
Zoning is Disabled by Default
The default zone on the Director 2/64 and the Director 2/140 is disabled by
default. Zoning must be configured in order for any devices connected to the
director to communicate.
14
c. Right-click the active CTP card and choose Switchover from the pop-up
menu.
The director will lose its Ethernet connection for a short period during the
d. On the Switchover CTP dialog box, choose Switchover to switch
operation to the backup card.
When switchover occurs, the green LED illuminates on the backup CTP
card to indicate that it is now the active card.
option on the Firmware Library dialog box.
Documentation".
"Other
Director Release Notes