Known Issues; Embedded Web Server Access To Modify Zones Is Limited To First; Snmp Trap Reports Incorrect Fru Position - HP StorageWorks 2/140 - Director Switch Release Note

Fw 05.02.00 and sw 07.01.00 and 07.02.00 hp storageworks director release notes
Hide thumbs Also See for StorageWorks 2/140 - Director Switch:
Table of Contents

Advertisement

Known Issues

This section describes the known issues related to the Director 2/64 and
Director 2/140.

Embedded Web Server access to modify zones is limited to first 255

zones
If you have an active zone set of greater than 255 zones, you will not be able to
access the zones past the 255th zone using the Embedded Web Server (EWS). The
higher number zone names are listed, but when accessed to modify the zone (for
example, the zone that would be numbered "n"), you will get the zone member list
for the (n-255) zone. This will be corrected in a future firmware release.
Workaround
Using HAFM to manage directors and edge switches will allow you to modify
zones in zone sets with greater than 255 zones.

SNMP trap reports incorrect FRU position

When an SNMP trap is sent and reports a FRU position number, the reported
number is one greater than the actual FRU position that caused the SNMP trap to
be issued.
Workaround
None.
Director Release Notes
Known Issues
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Storageworks director 2/64

Table of Contents