Setting The Connection Configuration; The Connection Setting To A Projector (Serial Connection); The Connection Configuration To Projectors; (Serial / Daisy Chain, Lan Connection) - Sanyo PLC-XF60 Owner's Manual

Startup of Real Color Manager and operation configuration

■ Setting the connection configuration

The connection setting to a projector (Serial connection)

When connecting via LAN connection, skip this operation.
1. Click "Setting" on the start-up screen to get to the next window.
2. Select COM port of the computer which is connected to Serial.
3. Select transmission speed of the Serial transmission.
(In usual settings, you do not need to change the default value.)
4. After these settings, click "OK".
The connection configuration to projectors. (Serial / Daisy chain, LAN
connection)
Check the projector list display box on the start-up screen to display the projector con-
nection setting screen. On this screen, you can set Serial and LAN connection. When
the projector connection has already done, the list of the connected projectors are
shown on the start-up screen. (q on p8)
9