Auto-Creation Of Connection List - Sanyo PLC-XF60 Owner's Manual

Auto-creation of connection list

With using this function, you can create a connecting list automatically. (The example
shown below is to create a list for 12 projectors.)
For the parts number below, refer to the Add dialog screen (Figure below).
1. Input the projector's No. which comes first in q.
2. Check the "Serial" w. (When connecting via LAN connection, check the circle
beside "LAN" r. (Figure below)
3. Input the ID No. (011-999) which comes first in e. (When connecting via LAN con-
nection, input the IP address of the projector which comes first in t. When you
have already set the password, input the password in y.
4. Input the number of the projectors in "Auto setting" i to create an auto-list. In this
example, it is 12. Press "Add" button o. Then the list of the 12 projectors will be
created.
CAUTION: THE LIST IS NOT TO SHOW PROJECTORS WHICH HAVE COMPLETED
THE CONNECTIONS. YOU STILL NEED TO MATCH THE ID NO. OF THE PROJEC-
TORS WITH ID NO. OF EACH PROJECTOR. (WHEN CONNECTING VIA LAN CON-
NECTION)
Add dialog screen
q
w
r
i
!0
Startup of Real Color Manager and operation configuration
e
t
y
u
o
!1
11