■ Connection
1. Connect a computer monitor output or an output terminal of a digital equipment to
the digital DVI-D terminal of Warp & Blending Board.
2. Connect the SERIAL PORT IN terminal of Warp & Blending Board to the SERIAL
terminal of the PC which is installed this software. When operating several projec-
tors equipped with Warp & Blending Board, connect SERIAL PORT OUT terminal of
Warp & Blending board to the SERIAL PORT IN terminal of the next projector's
Warp and Blending Board. Connect the same way to another projector and link
every projectors together.
DVI-D
SERIAL
To the SERIAL PORT IN
of the next projector
Preparation
5