Sanyo PLC-XF60 Owner's Manual page 25

2 Step editing
1. Drag the lines or Xa, Xb, Ya, Yb on the editing screen and adjust the overlapped
widht of the images. Each line show the screen position below.
Xa = Left width of the screen, Xb = Right width of the screen,
Ya = Top width of the screen ,Yb = Bottom width of the screen.
2. Adjust the offset level of the overlapped parts of the screen.
Click the each circle dot on the screen to display the offset setting dialog. Set the
offset level of each part.
Offset setting dialog
You can also set the figure with dialog by selecting "Blending setting (B)" in the
"Setting (O)" menu.
Overlapped parts of the screen:
Xa = Left width of the screen, Xb = Right width of the screen,
Ya = Top width of the screen ,Yb = Bottom width of the screen.
The figure is PIXCLE (Number of pixcels) unit.
Offset figure:
YT = Top offset of the screen, YB = Bottom offset of the screen
XL = Left offset of the screen, XR= Right offset of the screen,
3.Send the data to the projector and confirm the settings.
Repeat image editing with step1-3 for each projector and adjust the overlapped
parts to get the natural image.
STEP-2 Image Editing
25