Operating Configuration Of The Software; Compatible Signal; Preparation; Installation Of The Warp & Blending Board - Sanyo PLC-XF60 Owner's Manual
Instruction manual, plc-xf60 advanced screen manager
Hide thumbs
Also See for PLC-XF60:
- Service manual (192 pages) ,
- Owner's manual (26 pages) ,
- Specifications (1 page)
Table of Contents
Advertisement
Operating Configuration of the Software
Compatible signal
Preparation
1. Operating Configuration of the Software
This software operate under these environment.
Compatible OS
Main memory of the PC
Recommended CPU of the PC
Free hard disc of the PC (HDD)
DIsplay setting of the PC
Interface of the PC
2. Compatible Signal
This software is compatible with signals below.
Compatible signal
Computer output
Digital image
(Compatible with HDCP)
3. Preparation
■ Installation of the Warp & Blending Board
Install Warp & Blending Board to INPUT-4 of a projector or INPUT-5 of a slot. For
details about installation, see the owner's manual supplied with the projector. Some
projectors have already equipped with Warp & Blending Board at the time of
purchase.
4
Windows 98SE / Me / 2000 / XP
RAM 256MByte or more
Pentium3 500MHz or more
40MByte or more
XGA (1024 x 768) or more
SERIAL(RS-232C)
Signal format
640X480(VGA), 800X600(SVGA)
1024X768(XGA), 1280X1024(SXGA)
1400X1050(SXGA+), 1600X1200 (UXGA)
1366X768(WXGA)
480P, 576P, 720P, 1080I/60Hz,1080I/50Hz
Advertisement
Table of Contents
