1 P9000 tasks and related manuals
This section provides an ordered task list with pointers to the P9000 user guide that provides the
instructions for the task.
Required setup tasks
The following tables included the required tasks that must be completed to set up a P9000 storage
system.
General task list
The following table provides high-level steps for the installation and configuration tasks. The tables
following it provide detailed task lists. See the related user guides for detailed task lists and
instructions.
Installation task
1. Install the system
2. Turn on system power
Install software
(authorized service personnel)
3. Set up Remote Web Console user accounts,
enable software licenses
4. Provision and configure the system
5. Set up virtualization
6. Set up replication
7. Set up monitoring, logs, and alerts
8. Tune system for performance
9. Troubleshoot and maintain system
1. Installation tasks
Storage management task
Install the system
1.
Create installation plan.
2.
Prepare the facility
3.
Prepare the location where the system will
be installed
4.
Assist service personnel as needed.
5.
Connect the system to a host.
4
P9000 tasks and related manuals
User guide
HP StorageWorks P9000 Site Preparation Guide
HP StorageWorks P9000 Owner Guide
None
HP StorageWorks P9000 Remote Web Console User Guide
See
"4. Provisioning and configuration tasks" (page 5)
See
"5. Storage virtualization tasks" (page 6)
See
"6. Data replication and disaster recovery tasks" (page 6)
HP StorageWorks P9000 Audit Log User Guide
HP StorageWorks P9000 Remote Web Console User Guide
HP StorageWorks P9000 Performance for Open and Mainframe
Systems User Guide
HP StorageWorks P9000 Remote Web Console Messages
User guide
HP StorageWorks P9000 Site Preparation Guide