Removing Servers From A Site - HP StorageWorks P4000 User Manual

NOTE:
Adding the Failover Manager will likely cause the manager configuration to become less than optimal.
Be sure to change the manager configuration to best reflect the new configuration of the management
group. See the section Optimum Number of Managers" in the chapter, Working with Management
Groups" in the HP StorageWorks P4000 SAN Solution User Manual .

Removing servers from a site

You can remove servers from a site as server use and needs change.
To remove servers from a site:
1. Select the Sites node in the navigation window.
2. Select the site from which you want to remove the server.
3. Right-click and then select Edit Site.
4. In the Site Servers section, select the server from the list and then click Remove.
The server is removed from the list.
5. Click OK on the Edit Site window.
A message opens, warning that the server will lose its site preference.
6. Click OK to continue.
34 Implementing a Multi-Site SAN