Bush LED32K1 Instruction Manual page 35

HDMI Scan Info (HDMI only):
When you use HDMI mode, you can
choice the follow mode.See fig. 51.
- Automatic: Set to underscan or
overscan automatically when the
video signal is detected.
- Underscan: When the video
signal is detected, all active pixels
and lines are displayed with or
without border.
- Overscan: When the video signal
is detected, some active pixels
and lines at the edges are not
displayed.
Reset Default
- To reset all TV settings, including
stored channels, to their original fac-
tory values.
P.34
BUSH | HD Ready LED LCD | User Manual | Customer Helpline 0845 604 0105