Antenna Connection - Bush LED32K1 Instruction Manual

ANTENNA CONNECTION

WARNING:
- Switch off the TV before
connecting any external device.
CONNECTING THE ANTENNA
1. Connect the Antenna Plug to the
Antenna Input T located at the
rear of the TV.
See fig. 8.
2. For optimum picture quality, adjust
antenna direction if needed.
3. To improve the picture quality in a
poor signal area, you may use a
signal amplifier (not included).
AC POWER CORD CONNECTION
NOTE: Make sure your local Voltage
is 230V/240V~, 50Hz.
1. Connect the AC Power Cord a to
the mains socket.
See fig. 8
BUSH | HD Ready LED LCD | User Manual | Customer Helpline 0845 604 0105
a
fig. 8
T
Antenna Plug
P.11