Bush LED32K1 Instruction Manual page 6

NOTES:
- Please read the important safety
instructions before use.
REMOTE CONTROL
1. Unclip the Battery Cover from the Remote Con-
trol.
See fig. 1.
2. Insert two new 1.5V size AAA Batteries with the
+ and – marks correctly aligned.
See fig. 2.
HANDLING THE REMOTE CONTROL
Do not use caustic cleaners (porcelain, stainless
steel, toilet, or oven cleaner etc.) on the remote, as
may suffer damage:
• Never mix used and new batteries in the device.
• Replace all the batteries in a device at the same
time.
• Remove the batteries if the remote control is not
working.
• To avoid possible failure, read the following in-
structions and handle the remote cont.
• Do not drop or cause impact to the remote control.
• Do not spill water or any liquid on the remote
control.
• Do not place the remote control on a wet object.
• Do not place the remote control under the direct
sunlight or near heat sources.
Remove the battery from remote control handset
when it is not to be used for a long period. Other-
wise it could cause corrosion or battery leakage and
may result in physical injury and/or property damage
including fire.
BUSH | HD Ready LED LCD | User Manual | Customer Helpline 0845 604 0105
Battery
Compartment
Cover
it
2 x AAA Battery
fig. 1
fig. 2
P.05