Bush LED32K1 Instruction Manual page 17

VGA INPUT
- You can use your LED LCD-TV as a
monitor for your personal computer.
1. Connect the D type 15-pin VGA
interfacecable (not supplied) to VGA
Input Q on the LED LCD-TV.
See fig. 22.
2. Connect the audio cable (not sup-
plied) to Audio Input W on the back
of the LED LCD-TV (if necessary).
See fig. 22.
3. Press the PC
select the PC input.
See fig. 23.
HDMI INPUT
CAUTION: You must ensure both
devices are switched off before con-
nection.
1. Connect the cable from the HDMI
devices to the TV HDMI Input X .
See fig. 22.
2. Press the HDMI
to select the HDMI input.
See fig. 23.
3. Operate the corresponding external
equipment. (Refer to external equip-
ment operating guide.)
P.16
H B
or SOURCE
I
or SOURCE
BUSH | HD Ready LED LCD | User Manual | Customer Helpline 0845 604 0105
to
B
EPG
I
B
X W Q
HDMI to PC
Cable
YPbPr
fig. 23
fig. 22
fig. 24
H