Raid Functions; Installing Windows; Driver Installation Guide - ASROCK ZH77 Pro3 Quick Installation Manual

2.12 Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical
drive fi rst. Then, the drivers compatible to your system can be auto-detected and
listed on the support CD driver page. Please follow the order from up to bottom side
to install those required drivers. Therefore, the drivers you install can work properly.

2.13 Installing Windows

RAID Functions

If you want to install Windows
/ SATA2 / SATA3 HDDs with RAID functions, please refer to the document at the
following path in the Support CD for detailed procedures:
..\ RAID Installation Guide
2.14 Installing Windows
XP 64-bit Without RAID Functions
If you want to install Windows
OS on your SATA / SATA2 / SATA3 HDDs without RAID functions, please follow the
procedures below according to the OS you install.
2.14.1 Installing Windows
If you want to install Windows
HDDs without RAID functions, please follow the steps below.
AHCI mode is not supported under Windows
Using SATA / SATA2 / SATA3 HDDs without NCQ function
STEP 1: Set Up UEFI.
A. Enter UEFI SETUP UTILITY
B. Set the option "SATA Mode Selection" to [IDE].
STEP 2: Install Windows
34
®
7 / 7 64-bit / Vista
® TM
7 / 7 64-bit / Vista
7 / 7 64-bit / Vista
®
® TM
7 / 7 64-bit / Vista
XP / XP 64-bit Without RAID Functions
®
®
XP / XP 64-bit OS on your SATA / SATA2 / SATA3
Advanced screen
®
XP / XP 64-bit OS on your system.
ASRock ZH77 Pro3 Motherboard
TM TM
/ Vista 64-bit With
TM
/ Vista 64-bit on your SATA
TM TM
/ Vista 64-bit / XP /
TM
/ Vista 64-bit / XP / XP 64-bit
®
XP / XP 64-bit.
Storage Confi guration.