Onboard Headers And Connectors - ASROCK ZH77 Pro3 Quick Installation Manual

2.11 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place
jumper caps over these headers and connectors. Placing jumper caps
over the headers and connectors will cause permanent damage of the
motherboard!
Serial ATA2 Connectors
(SATA2_2: see p.2, No. 14)
(SATA2_3: see p.2, No. 15)
(SATA2_4: see p.2, No. 16)
(SATA2_5: see p.2, No. 17)
Serial ATA3 Connectors
(SATA3_0: see p.2, No. 15)
(SATA3_1: see p.2, No. 16)
Serial ATA (SATA)
Data Cable
(Optional)
USB 2.0 Headers
(9-pin USB4_5)
(see p.2, No. 22)
(9-pin USB6_7)
(see p.2, No. 23)
ASRock ZH77 Pro3 Motherboard
These four Serial ATA2 (SATA2)
SATA2_2
connectors support SATA data
SATA2_3 cables for internal storage
devices. The current SATA2
SATA2_4
interface allows up to 3.0 Gb/s
SATA2_5
data transfer rate.
These two Serial ATA3 (SATA3)
SATA3_1
connectors support SATA data
SATA3_0
cables for internal storage
devices. The current SATA3
interface allows up to 6.0 Gb/s
data transfer rate.
Either end of the SATA data
cable can be connected to the
SATA / SATA2 / SATA3 hard
disk or the SATA2 / SATA3
connector on this motherboard.
Besides four default USB 2.0
ports on the I/O panel, there are
three USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB 2.0
ports.
29