Using The Remote Control; Remote Control Buttons - Epson RB-V11H255020-N - PowerLite 83c LCD Projector Product Information Manual

PowerLite 822p/83c Projector
Power Lamp Temp.
light light light
Red Red Red

Using the Remote Control

The remote control uses a line-of-sight infrared signal. It lets
you access the projector's features from anywhere in the room—
up to 20 feet away. (This distance may be shorter if the remote
control batteries are low.)
The projector may not respond to remote control commands in
these conditions:
❏ You are too far away—not within 20 feet (6 meters)—or
not within 30° to the left or right of the front or rear sensor
or 15° above or below it
❏ The battery is weak or not installed correctly
❏ Ambient light is too bright
❏ A fluorescent light is shining into the infrared receiver
❏ A strong light source (such as direct sunlight) shines into the
infrared receiver
❏ Other equipment emitting infrared energy is present (such
as a radiant room heater)
❏ If a button on the remote control has been held for more
than 30 seconds, the remote enters sleep mode. Press
another button for normal operation.
10 PowerLite 822p/83c Projector
-
Description
There is an internal error in the
projector. Turn the projector off
and unplug it. Contact Epson for
help.

Remote Control Buttons

Turns
projector
on or off
Displays or hides
projector menus
Selects a menu
option or displays
the next screen
or menu; Auto
function
automatically
adjusts computer
images to the
optimum settings
Cycles through
8 color modes
E-Zoom + zooms
in on (enlarges)
selected area and
E-Zoom – reduces
the zoomed image
3/08
Selects another
image source
Cancels current
function or
displays previous
menu or screen
Changes the
aspect ratio of
images from
4:3 to 16:9
Freezes the
current video
or computer
image
Turns off audio
and video;
press again to
resume