Before You Proceed; Onboard Led - Asus P8H61-M LK R2.0 User Manual

1.2

Before you proceed

Take note of the following precautions before you install motherboard components or change
any motherboard settings.
•
•
•
•
•
Standby Power LED
The motherboard comes with a standby power LED that lights up to indicate that the system
is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down
the system and unplug the power cable before removing or plugging in any motherboard
component. The illustration below shows the location of the onboard LED.
P8H61-M LK R2.0 Onboard LED
1-4
Unplug the power cord from the wall socket before touching any component.
Before handling components, use a grounded wrist strap or touch a safely grounded
object or a metal object, such as the power supply case, to avoid damaging them due
to static electricity.
Hold components by the edges to avoid touching the ICs on them.
Whenever you uninstall any component, place it on a grounded antistatic pad or in the
bag that came with the component.
Before you install or remove any component, ensure that the ATX power supply is
switched off or the power cord is detached from the power supply. Failure to do so
may cause severe damage to the motherboard, peripherals, or components.
P8H61-M LK R2.0
Standby Power
SB_PWR
ON OFF
Powered Off
Chapter 1: Product introduction