Asus P8H61-M LK R2.0 User Manual page 36

6. Intel H61 Serial ATA 3.0Gb/s connectors (7-pin SATA3G_1~4)
®
These connectors connect to Serial ATA 3.0 Gb/s hard disk drives and optical drives via
Serial ATA 3.0 Gb/s signal cables.
P8H61-M LK R2.0 SATA 3.0Gb/s connectors
•
•
•
•
•
1-24
P8H61-M LK R2.0
You must install Windows
hard disk drives.
Due to H61 Chipset limitation, AHCI Mode only works on Windows
Please use IDE Mode on Windows
[IDE] is the default SATA type Using Windows
SATA type.
To configure the default SATA type in BIOS, click Advanced Mode > Advanced tab >
SATA Configuration > SATA Mode Selection.
When using hot-plug and NCQ, set the SATA Mode Selection item in the BIOS to
[AHCI]. See section 2.5.3 SATA Configuration for details.
XP Service Pack 3 or later version before using Serial ATA
®
XP.
®
XP, there is no need to change the
®
Vista/Windows
®
Chapter 1: Product introduction
7.
®