Table of Contents
Advertisement
9.
Lower the top cover but do not press down to latch it closed
yet. This will protect the drums from excessive exposure to
room lighting while you check the remaining areas for
jammed sheets.
10. Open the rear exit tray (a) and check for a sheet of paper in
the rear path area (b).
• Pull out any sheets found in this area.
• If the sheet is low down in this area and difficult to
remove, it is probably still gripped by the fuser. In this case
raise the top cover, reach around and press down on the
fuser pressure release lever (a).
11. If you are not using the rear exit tray, close it once any paper
has been removed from this area.
91
– MPS710c User's Guide
b
a
a
Advertisement
Table of Contents
