Oki LP441s Manual page 20

3. Click "Set" to set the values to the printer.
* When DHCP is not used for IP address settings, IP Address and port number by checking
the box of "Register this printer after setting", IP address and port number that is set after
setting is complete are registered in the printer setting tool. In this case printer name is
registered as "Auto added printer".
Fig. 7-2-3 Printer setting (Wireless LAN) screen
4. Following screen is displayed when setting is complete. Click "OK" and restart printer to
enable setting value.
Fig. 7-2-4 Setting completion screen
Printer configuration tool
18