Oki LP441s Manual page 19

Item Initial value
Security type (1) No use
Authentication None
system
Key index None
WEP Key None
Cipher system None
*1
Authentication None
system *1
Pre-shared key None
*1
EAP mode No
*1 authentication
User name None
*1
Password None
*1
Printer configuration tool
Table7-2-2-2 Security setting item list
Range
(1)No use (2)WEP (3)WPA *1
(1) Open system authentication (2) Shared key authentication
*Shared key authentication can set only for printers mounting IEEE 802.11g
supported wireless LAN module.
Select WEP key index
1-4
Specify WEP key by using format (1)-(5) for each index.
(1)ASCII(5 characters)
Valid characters(0-9, A-Z, a-z, "-", "_")
(2)ASCII(13 characters)
Valid characters(0-9, A-Z, a-z, "-", "_")
(3)HEX(10 digit)
Valid characters(0-9, A-F, a-f)
(4)HEX(26 digit)
Valid characters(0-9, A-F, a-f)
(5)Blank
Don't set WEP key to maintain printer setting value. Specify only when
changing key index.
Set WPA cipher system.
(1) TKIP (2) AES
*AES can set only for printers mounting IEEE 802.11g supported wireless
LAN module.
Set WPA authentication.
(1) WPA-PSK (2) WPA-EAP
Only available for WPA-PSK use.
8-63 characters
(1)No authentication(Not in the list when WPA-EAP)
(2)EAP-MD5
Specify character strings consist of 1-63 characters.
Specify 0-32 characters.
*1 Effective only when operation mode is infrastructure.
WEP
WPA
EAP
17