Oki LP441s Safety Information Manual page 4

Warranty and regulatory information
Hide thumbs Also See for LP441s:
Table of Contents

Advertisement

Available languages

Available languages

• The power supply required for this product is 220-240 VAC, 50/60
Hz. (For any DC powered product, the figures are 9.6-31.2VDC,
4-1.8A.) Refer to your product's rating label on the machine for full
power rating details. Ensure that you have a suitable power supply
before connecting the product. If in doubt contact your dealer or
check with your local power provider.
• Ensure both the product and mains power switches are in the OFF
position before connecting the AC power cable.
• Do not connect or disconnect the power plug with a wet hand as
this may cause electric shock.
• Always hold the power plug to connect/disconnect the power cable
to/from the mains socket. Unplugging by pulling on the cable can
cause fraying and may lead to fire or electric shock.
• This product has an earthed plug as a safety feature and will only
connect to an earthed socket. Do not attempt to defeat the earthing
or there is a risk of fire or shock.
• If using an extension cable or power strip ensure that the total
current rating (amperes) of all connected equipment is less than the
maximum rating of the extension cable, power strip or wall outlet.
If the product is already supplied with a fitted power strip then no
additional power strip or extension cable should be used to connect
to the mains wall outlet. Otherwise, fire or shock may occur.
• Ensure the power cable is routed so as not to be damaged or cause
a trip hazard. If the cable becomes frayed or damaged replace it
immediately to prevent any risk of shock.
• Do not twist, constrict or knot the power cable as this can cause
overheating which may lead to fire or electric shock.
• Ensure the power socket to which the product is connected is easily
accessible at all times and not obstructed.
• Use only the power cable supplied. Using a power cable not
intended for this product may lead to fire or electric shock.
• To avoid risk of fire and electric shock, do not use the power cable
supplied with this product for any other electrical equipment.
4 English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lp441bLp440Lp441Lp470Lp480

Table of Contents