Menu Items; Sub-Menu Items; Configuration Fields; Pop-Up Window - Asus P5VD2-VM SE User Manual

2.2.4

Menu items

The highlighted item on the menu
bar displays the specific items for that
menu. For example, selecting Main
shows the Main menu items.
The other items (Advanced, Power,
Boot, and Exit) on the menu bar have
their respective menu items.
2.2.5

Sub-menu items

A solid triangle before each item on any menu screen means that the iteam has a
sub-menu. To display the sub-menu, select the item and press <Enter>.
2.2.6

Configuration fields

These fields show the values for the menu items. If an item is user- configurable,
you can change the value of the field opposite the item. You cannot select an item
that is not user-configurable.
A configurable field is enclosed in brackets, and is highlighted when selected. To
change the value of a field, select it then press <Enter> to display a list of options.
Refer to "2.2.7 Pop-up window."
2.2.7

Pop-up window

Select a menu item then press <Enter> to display a pop-up window with the
configuration options for that item.
2.2.8

Scroll bar

A scroll bar appears on the right side of a
menu screen when there are items that do
not fit on the screen. Press the
Up/Down arrow keys or <Page Up> /<Page
Down> keys to display the other items on
the screen.
2.2.9

General help

At the top right corner of the menu screen
is a brief description of the selected item.
2-14
BIOS SETUP UTILITY
Main Advanced Power Boot
System Time [10:55:25]
System Date [Mon 07/05/2006]
Legacy Diskette A [1.44M, 3.5 in]
Language [English]
Primary IDE Master [ST320410A]
Primary IDE Slave [ASUS CD-S520/A]
Secondary IDE Master [Not Detected]
Secondary IDE Slave [Not Detected]
Third IDE Master [Not Detected]
Third IDE Slave [Not Detected]
Fourth IDE Master [Not Detected]
System Information
v02.58 (C)Copyright 1985-2007, American Megatrends, Inc.
Main menu items
Advanced Chipset settings
WARNING: Setting wrong values in the sections below
may cause system to malfunction.
Configure DRAM Timing by SPD
Memory Acceleration Mode
DRAM Idle Timer
DRAm Refresh Rate
Graphic Adapter Priority
Graphics Aperture Size
Spread Spectrum
ICH Delayed Transaction
MPS Revision
Pop-up window
Exit
Use [ENTER], [TAB] or
[SHIFT-TAB] to select
a field.
Use [+] or [-] to
configure the System
Time.
Select Screen
Select Item
+-
Change Field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
[Enabled]
[Auto]
[Auto]
[Auto]
[AGP/PCI]
[ 64 MB]
[Enabled]
Select Screen
Select Item
[Enabled]
+- Change Option
F1 General Help
[1.4]
F10 Save and Exit
ESC Exit
Scroll bar
Chapter 2: BIOS setup