Table of Contents
Advertisement
3.
From this point, you can auto-configure the RAID array by selecting Auto
Setup for Data Security or manually configure the RAID array for mirrored
sets. If you want to auto-configure, proceed to the next step, otherwise, skip
to step 6.
4.
Select Auto Setup for Data Security and press <Enter>. The following
confirmation message appears.
5.
Press <Y> to confirm or <N> to return to the configuration options. If you
selected <Y>, proceed to step 11.
6.
Select Select Disk Drives, then press <Enter>. Use arrow keys to select disk
drive/s, then press <Enter>. An asterisk appears before a selected drive.
7.
Select Start Create Process and press <Enter> to setup hard disk for RAID
system. The following inquiry appears:
8.
If you select <Y> the utility will duplicate your data. Press <Y> anytime if you
want to exit the duplication process.
9.
If you select <N>, the following confirmation message appears.
10. Press <Y> to confirm or <N> to return to the configuration options.
11. Press <Esc> to go back to main menu.
3-14
Auto create array will destroy all
data on disks, Continue? (Y/N)
Save the data on source disk to
mirror after creation? (Y/N)
Duplicating...
RAID 1 for data protection
Press Yes(Y) to Escape
The data on the selected disks will
be destroyed. Continue? (Y/N)
Chapter 3: Software support
Hide quick links:
Advertisement
Table of Contents
